Bambu Lab P2S · Maintenanceby BEARX3D PDF
Back to schedule
Full schedule · yearly

Swap the chamber filter

Replace the activated-carbon chamber filter once a year to absorb fumes and keep your workspace smelling fresh.

3 minutes Difficulty 1/3
0 of 3 done0%

You'll need

  • Replacement filter

  1. Find the filter door

    Back of the printer, small magnetic panel — pops open with a fingernail.

  2. Pull the old filter out, slide the new one in

    It only goes in one way around. Arrow points toward the chamber.

  3. Note the date

    Stick a small label on the printer with today's date so future-you remembers.

    Pro tip
    Replace yearly with normal use, every 6 months if you print ABS / ASA daily.