AMS 2 Pro · monthly
Replace or regenerate the desiccant
Check the desiccant monthly. Saturated beads let moisture ruin filament, causing bubbles, weak layers, and failed prints.
5 minutes Difficulty 1/3
0 of 3 done0%
You'll need
- New desiccant or oven
Pop the AMS lid
Lift the lid and pull out the small desiccant cartridges from each slot.
Check the indicator
If the colour beads have gone pink, the desiccant is saturated. Time for action.
Why this mattersBlue / orange = dry. Pink / green = saturated. Easy.Regenerate (oven) or replace
Oven at 120 °C for 2 hours regenerates them. Or just drop in fresh beads — cheaper than your time, honestly.