Routine basics · weekly
Empty the purge chute
Empty the rear purge chute weekly. Overflowing waste blocks the nozzle during purging and wastes filament mid-print.
2 minutes Difficulty 1/3
0 of 3 done0%
You'll need
- Bin
Tip out the back tray
Pull out the small tray at the rear-left and dump the colourful purge poops into the bin.
Glance into the chute
Use a torch. Any wedged blobs get fished out with tweezers before they jam the next purge.
Wipe the area
A quick wipe of the surrounding panel keeps stray plastic off the build-plate magnets.