Routine basics · monthly
Clean the LiDAR & nozzle camera
Gently clean the LiDAR and camera lenses under the toolhead. Clear optics mean reliable first-layer scanning and AI detection.
3 minutes Difficulty 1/3
0 of 3 done0%
You'll need
- Microfibre swab
- Optional: lens cleaner
Locate the lenses
Under the toolhead you'll see two tiny glass windows — the LiDAR scanner and the AI camera.
Wipe very gently
Dry microfibre first. If there's stuck residue, the smallest drop of lens cleaner on the swab — never directly on the lens.
Run a calibration print
From the screen, run 'Auto-calibration'. If first layers were getting weird, this usually fixes it.