Full schedule · quarterly

Swap the hotend or nozzle

Swap a worn or clogged hotend in minutes. The P2S quick-release clip makes nozzle changes far faster than on older printers.

8 minutes Difficulty 2/3

0 of 4 done0%

You'll need

Preheat & unload filament
On the screen choose 'Replace nozzle' — it walks you through preheat and unload automatically.
Let it cool to safe temperature
Wait for the screen to tell you it's safe. Don't rush this part.
Why this matters
A 180 °C nozzle still leaves serious burns. Patience or gloves — pick one.
Release the clip and pull the hotend straight down
The P2S uses a quick-release clip. Squeeze, the hotend drops out cleanly.
Slot the new one in
Push up until it clicks. Confirm the new nozzle size on the screen so flow rates stay accurate.